|
Coil Specifications
At J.F.D. Tube & Coil Products, Inc., we offer a wide range of standard and special features. Our coils carry ARI 410 certification.
Fin Material
.006, .010 Aluminum
.006 Copper
Fin Spacing
3/8" OD Tubing - 10 to 22 fins per inch
1/2" OD Tubing - 10 to 16 fins per inch
5/8" OD Tubing - 4 to 16 fins per inch
Tube Material
3/8" OD x .016" Wall
1/2" OD x .016", .020" Wall
5/8" OD x .020", .025", .035", .049" Wall
Casings
16 Ga. Galvanized Steel
16 Ga. Stainless Steel
Aluminum
Copper
Headers
Type "L" from 7/8" OD to 4-1/8" OD Copper
|
Connections
Water & Steam Coils - Copper MPT Connections
DX Distributors - Standard or Hot Gas
DX, Condenser - Copper Sweat Connections
Optional Steel Connections - Threaded (MPT or FPT)
Supply Opposite End connections on Steam Dist. Coils
Brazing
All joints are hand brazed
Testing
All coils are leak tested under water at 450 PSIG dry
nitrogen (Meets UL burst test)
Other Options
Non-standard casing flange widths and depths
Special coil coatings
Additional distributors
Non-standard circuiting
Intertwined circuiting (DX Coils only)
Pitched Casing
|
Back
|
